Product Description

The Mode Carbon High Kick Trunk Spoiler is the first offering we present to you for the F90 M5 chassis. Sharing similar styling ques from what you would expect from the experts at BMW themselves. Complimenting your trunk lines without compromising the harmonious angles that are present from stock form. When adding our 100% Carbon Fiber High Kick Trunk Spoiler, the dash of flare will be sure to coincide with any theme you dare.

Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fiber
Process
Vacuum Infusion
  1. Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
  2. Test fit the spoiler prior to installing.
  3. Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
  4. Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
  5. Place the spoiler on the car without removing all of the red backing of the 3M tape.
  6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
  7. Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.

Product Description

The Mode Carbon High Kick Trunk Spoiler is the first offering we present to you for the F90 M5 chassis. Sharing similar styling ques from what you would expect from the experts at BMW themselves. Complimenting your trunk lines without compromising the harmonious angles that are present from stock form. When adding our 100% Carbon Fiber High Kick Trunk Spoiler, the dash of flare will be sure to coincide with any theme you dare.

Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fiber
Process
Vacuum Infusion
  1. Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
  2. Test fit the spoiler prior to installing.
  3. Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
  4. Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
  5. Place the spoiler on the car without removing all of the red backing of the 3M tape.
  6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
  7. Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.