Product Description

Incorporating styling cues from Affalterbach, our Edition 1 Front Splitter turns your C63(S) into an untamed DTM-inspired beast without sacrificing daily drivability. Our 3 piece design protrudes outward from the front bumper, as opposed to sitting underneath it, thus preserving your ground clearance and allowing for a better approach angle. Street presence is off the charts with this one, adding a sinister front personality to match the racket coming from the spooling twin turbos. The left lane is all yours, and they will move out of your way.

Our commitment to quality is high-grade carbon fiber that reduces weight, increases performance and improves aerodynamics. Whether your car is for the street or dedicated to track use, Mode Carbon products offer an ample blend of quality, refinement and style.

Specification
Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
  1. Remove the rivets on the two outermost mounting points on the front bumper.
  2. Apply 3M double-sided tape to the surfaces of the splitter that make contact with the front bumper.
  3. Bolt the splitter onto the front bumper at the corresponding OEM mounting points using the pre-drilled holes on the splitter.

Product Description

Incorporating styling cues from Affalterbach, our Edition 1 Front Splitter turns your C63(S) into an untamed DTM-inspired beast without sacrificing daily drivability. Our 3 piece design protrudes outward from the front bumper, as opposed to sitting underneath it, thus preserving your ground clearance and allowing for a better approach angle. Street presence is off the charts with this one, adding a sinister front personality to match the racket coming from the spooling twin turbos. The left lane is all yours, and they will move out of your way.

Our commitment to quality is high-grade carbon fiber that reduces weight, increases performance and improves aerodynamics. Whether your car is for the street or dedicated to track use, Mode Carbon products offer an ample blend of quality, refinement and style.

Specification
Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
  1. Remove the rivets on the two outermost mounting points on the front bumper.
  2. Apply 3M double-sided tape to the surfaces of the splitter that make contact with the front bumper.
  3. Bolt the splitter onto the front bumper at the corresponding OEM mounting points using the pre-drilled holes on the splitter.