Product Description


There is no better way to make a statement than with our signature style Bootlid Spoiler for the W205 C63(S) Sedan. With a Mode Carbon product, you get that signature aggressive styling that is sure to be imitated by the masses. Our goal from the onset of designing this piece was to add some much needed aggression to the otherwise rounded trunk line of the W205. The lines of our Bootlid Spoiler aim to flatten out the top curve of the trunk when viewing straight on from the rear, while adding a robust muscular side profile to match this car’s serious performance characteristics.
Specification
Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
  1. Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
  2. Test fit the spoiler prior to installing.
  3. Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
  4. Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
  5. Place the spoiler on the car without removing all of the red backing of the 3M tape.
  6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
  7. Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.

Product Description


There is no better way to make a statement than with our signature style Bootlid Spoiler for the W205 C63(S) Sedan. With a Mode Carbon product, you get that signature aggressive styling that is sure to be imitated by the masses. Our goal from the onset of designing this piece was to add some much needed aggression to the otherwise rounded trunk line of the W205. The lines of our Bootlid Spoiler aim to flatten out the top curve of the trunk when viewing straight on from the rear, while adding a robust muscular side profile to match this car’s serious performance characteristics.
Specification
Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
  1. Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
  2. Test fit the spoiler prior to installing.
  3. Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
  4. Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
  5. Place the spoiler on the car without removing all of the red backing of the 3M tape.
  6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
  7. Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.