Product Description

Our F87 M2 Performance Spoiler adds the perfect amount of aggression to the silhouette of your M2. Our Performance Spoiler will add that dash of carbon fiber detail to your trunk that every M car deserves. Most importantly with the addition of our F87 M2 Performance Spoiler you will not compromise the goals of the factory designers. Subtle touches are best suited for this vehicle as the factory has gone above and beyond buffing out the vehicle’s body work. This item is available in the OEM 2×2 twill weave with a high gloss finish. This application also works on the F22 2 Series.

Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
  1. Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
  2. Test fit the spoiler prior to installing.
  3. Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
  4. Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
  5. Place the spoiler on the car without removing all of the red backing of the 3M tape.
  6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
  7. Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.

Product Description

Our F87 M2 Performance Spoiler adds the perfect amount of aggression to the silhouette of your M2. Our Performance Spoiler will add that dash of carbon fiber detail to your trunk that every M car deserves. Most importantly with the addition of our F87 M2 Performance Spoiler you will not compromise the goals of the factory designers. Subtle touches are best suited for this vehicle as the factory has gone above and beyond buffing out the vehicle’s body work. This item is available in the OEM 2×2 twill weave with a high gloss finish. This application also works on the F22 2 Series.

Technical Specs
Weave
2x2
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
  1. Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
  2. Test fit the spoiler prior to installing.
  3. Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
  4. Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
  5. Place the spoiler on the car without removing all of the red backing of the 3M tape.
  6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
  7. Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.