Please allow for a standard manufacturing lead time of 4-6 weeks on this item from the date of purchase.
Product Description
Our High Kick Performance Spoiler for the F82 M4 takes everything you love about the styling of the M4 and turns the volume up a level. The grooved center lines are continued from the carbon fibre roof for a heightened level of synergy. The High Kick Performance Spoiler is raised 3/4 of an inch from the standard Performance Spoiler for a more aggressive side profile and a bolder impact when viewing straight on from the rear. Never over the top, this design hits the sweet spot of refinement in taste and a commanding presence. For those that take the character of their vehicle seriously, we have your solution.
Technical Specs
Weave
1x1
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
- Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
- Test fit the spoiler prior to installing.
- Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
- Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
- Place the spoiler on the car without removing all of the red backing of the 3M tape.
- Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
- Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.
Product Description
Our High Kick Performance Spoiler for the F82 M4 takes everything you love about the styling of the M4 and turns the volume up a level. The grooved center lines are continued from the carbon fibre roof for a heightened level of synergy. The High Kick Performance Spoiler is raised 3/4 of an inch from the standard Performance Spoiler for a more aggressive side profile and a bolder impact when viewing straight on from the rear. Never over the top, this design hits the sweet spot of refinement in taste and a commanding presence. For those that take the character of their vehicle seriously, we have your solution.
Technical Specs
Weave
1x1
Finish
High Gloss UV Protected Clear Coat
Construction
Pure Carbon Fibre
- Uninstall the OEM trunk spoiler. Make sure that the mounting surface is cleaned thoroughly afterward.
- Test fit the spoiler prior to installing.
- Line up the spoiler on the trunk and mark its proper positioning with painter’s tape.
- Peel the red backing of the 3M tape approximately 2 inches from either side of the spoiler.
- Place the spoiler on the car without removing all of the red backing of the 3M tape.
- Once you have the spoiler aligned into the correct position, carefully remove the red backing of the 3M tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
- Apply pressure to the spoiler after it is installed with painter’s tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.
